NETMAND AND MULTICOM INTERFACES AND ADAPTERS

For Riello Galatrek UPS systems 350VA-6MVA

A wide range of interface kits, cables, SNMP adapters, USB converters and MultiPlexers is available to help you get the most from your UPS. Specialist advice can be obtained from our sales and technical teams.

NETMAN 101/102
The NetMan network agent allows UPS management across a LAN using any of the main network communication protocols - TCP/IP, HTTP and network interface (SNMP). NetMan enabled UPS integrate easily into medium and large sized networks and provide reliable communications between the UPS and management systems employed.
• Configured via TELNET or a serial terminal
• Compatible with PowerShield² and PowerNETGuard control software
• Integrated Web server for browser-based display
• TeleGuard modem compatible
• Firmware upgradeable through the serial port.
• Supports the network interface (SNMP) standard communication protocol with proprietary RFC 1628 and MIB

MULTICOM 301/302
The MultiCOM 301/302 protocol converter may be used to monitor the UPS using the MODBUS/JBUS protocol on RS485 or RS232 serial lines. It will also manage a second, independent RS232 serial line that can be used to connect other devices such as the Netman 101 or a PC that uses the PowerShield² software.
• Configuration of the port for MODBUS/JBUS as RS232 or RS485
• Management of two independent serial lines
• Suitable for integration with Building Management Systems (BMS)
• LED signalling of the communication flow
• Firmware upgradeable through the serial port.

MULTICOM 351/352
The MultiCom 351/352 is a serial duplexer that allows two devices to be connected to a single serial port on a UPS. It can be used where numerous serial connections and multiple polling of UPS are required, and is ideal for LAN networks with a firewall.
• Cascading configuration giving a maximum of 4 serial ports
• LED signalling of the communication flow
• Firmware upgradeable through the serial port.

MULTI I/O
The Multi I/O device integrates the UPS with control systems with complete configurability of the input and output signals.
• 8 analog/digital inputs
• 8 relay outputs configured using the UPS and input status
• May communicate with the UPS via RS-232
• can control 2 independent serial lines RS232/RS485 to monitor the UPS and the device itself with the Modbus/Jbus protocol.

USB Converter
The RS232-USB converter allows UPS without a USB port to connect to Macintosh, Windows and linux PCs with this type of port.
• compatible with USB 1.2
• compatible with PowerShield²

POWERSHIELD² UPS Monitoring and Control Software
350VA-6MVA

For Riello Galatrek UPS systems on Windows, Novell, Unix and MAC operating systems

POWERSHIELD² provides user-friendly UPS management. The software displays real time information in the form of bar charts and values for critical data such as mains voltage, UPS load and battery charge%. The software allows remote interrogation of UPS logs and operating parameters to help diagnose alarms and potential fault conditions.

OPERATING SYSTEMS SUPPORTED
• Windows 95-OSR2, 98, Me, NT 4.0, 2000, XP, 2003
• Linux
• Novell Netware 3.x, 4.x, 5.x, 6
• Mac OS X, 9.x
• IBM OS/2 Warp and Server
• HP OPEN VMS
• The most widely used UNIX operating systems such as: IBM AIX, HP UNIX, SUN Solaris INTEL and SPARC, SCO Unix and UnixWare, Silicon Graphic IRIX, Compaq Tru64 UNIX and DEC UNIX, BSD UNIX and FreeBSD UNIX, NCR UNIX.

CHARACTERISTICS
• Sequential and priority-based shutdown: PowerShield² provides unattended shut-down of single and networked PCs, saving any active work and the most widely used applications Windows. Users can define their own shutdown procedures and establish the order in which critical computers (such as servers) are to be powered down.

• Multi-platform compatibility: PowerShield² uses the TCP/IP comunications protocol to achieve standardised management and monitoring across the widest possible range of platforms. This makes it possible to monitor computers with different operating systems from a single console, for example monitoring a UNIX server from a PC with Windows and also connecting to UPS located in different geographical areas using dedicated networks (intranets) or the Internet.

• Event scheduling: PowerShield² users can program their own shutdown procedures, detailing power-off and power-up scenarios to increase system safety and, equally important, power economy.

• Messages management: PowerShield² keeps users constantly informed about the status of their local and network UPS. A list can be defined of users who should receive e-mail messages, faxes and SMS when faults or sudden blackouts occur.

• Integrated SNMP agent: PowerShield² features an integrated SNMP agent for management of the UPS. This agent is able to send all the UPS information and generate traps using the RFC 1628 MIB standard. This makes it possible to manage the UPS in compatible SNMP management stations such as HP Open View, Novell Managewise and IBM NetView.

• Wap server integrated: PowerShield² allows the user to monitor the UPS through WAP mobile phone.

• Security, easy to use and connect: communication is password protected to ensure UPS system security. Using the new discovery/browsing function, all the RIELLO UPS connected to a protected computer or LAN can be displayed in a list format. In the absence of a LAN connection, support is provided for modem-based communication

Click here for Powershield Brochure (PDF 1,229KB)